Adhesives + Coatings

SiTak is an adhesive suitable for bonding a wide range of materials such as foam, cork, felt and other lightweight materials to themselves and to wood, metal, glass and rigid plastic materials.

WARNING - Ensure you read the Safety Datasheet and ensure you do not use in confined spaces.

Sold in 500ml tins
Boxed in 12's

Product Weight 0.5kg


People who bought this item also bought:

Fill & Fix Foam with is a one-component, selfexpanding,
ready to use polyurethane foam with
CFC-free propellants, which are completely
harmless to the ozone layer.
Characteristics:
· Excellent adhesion on most substrates (except
Teflon, PE and PP)
· High thermal and acoustical insulation
· Very good filling capacities
· Excellent mounting capacities
· Excellent stability (no shrink or post expansion)

Sold in 500ml tins
Sold in boxes of 12

Product Weight 0.63kg


People who bought this item also bought:

Idenden Protective Sealer Coating ET-10 is ideal as a protective sealer of internally located insulated piping, equipment, air conditioning ducting and for asbestos encapsulant - Class 0 compliant (BS476 Part 6 & 7 Class 1).

Internal use only.

Sold in 10 litre tubs

NB - Sorry but we are unable to send by carrier due damage risk. Please call the Sales Team with your enquiry.

Product Weight 13.8kg



Related products:

Idenden Sprayable Vapour Barrier Coating ET150 is ideal for applications as a vapour barrier coating for internal and external insulated piping, equipment and air conditioning ducting. It is also suitable as an asbestos encapsulant. It is a high quality polymer emulsion. It is easily applied by spray or brush to provide a durable and flexible, water resistant finish over a wide service temperature range. ET150 has Class 0 Compliance and therefore dries to form a flame resistant finish.

Sold in 10 litre tubs

Available in White and Grey


NB - Sorry but we are unable to send by carrier due damage risk. Please call the Sales Team with your enquiry.

Product Weight 0kg



Related products:

Aquagrip 326 is a water based sealant. It is based on an aqueous polyvinyl acetate polymer emulsion. It is fast drying and has a high bonding strength.

Sold in 5 litre tubs

Product Weight 5.43kg


People who bought this item also bought:

This product allows the safe removal of textured coatings without causing dust from harmful Asbestos fibres.

Product Features : Water-based, Non-hazardous, Non-caustic, pH-neutral, Solvent-free, Non-flammable, Non-combustible, Minimal evaporation.
Clings 100% to all surfaces - including
vertical surfaces and ceilings, Minimal VOC content; 0.000004%, as certified by an independent laboratory, following a flame ionisation detection test.
Does not give off fumes - no need for ventilation
Suitable for use by and near people with respiratory problems, such as asthma sufferers.
Non-irritant - does not cause skin burns - safe to use around children and pets
Wet working system - keeps wet and working for up to 24 hours. Re-wet if the product dries out.

Textured Coatings such as Artex® takes only 15-30 minutes.
Textured Coatings plus 1-2 layers paint up to 1 hour.
Multi-layered paint over textured coatings 1 hour to overnight.

Product Weight 16.4kg

Developed by BP in the mid 1980's specifically for the asbestos removal industry, Astrip is now produced exclusively by Asbestostrip Innovations UK. No other product has come close to offering you the protection and effeciency of Astrip.

The advanced formula is the only wetting fluid that breaks down surface tension of the water, ensuring complete wetting of the fibres. The unique nature of the fluid ensures that it does not dry out so residual fibres cannot become airbourne.

* No pre mixing required - use directly from the drum with red box.
* Excellent and fast penetrating.
* Negligible fibre lift.
* Softens matrix binders.
* Does not dry out.
* Does not solidify. Wet today, remove at your convienience
* Protects workforce.
* Minimal clean up time and safe disposal.
* Low COSHH requirements - no solvents or petrochemicals.

Sold in 5L and 25L containers

Product Weight 0.25kg

Quickly and safely remove tar, bitumen, adhesives and sealers from vehicle paintwork.

Product Weight 5kg

A multi-purpose conditioning and revitalising treatment for engine compartments, metal, paintwork, plastics and rubber for exterior plastic and rubber trim.

Product Weight 5kg

Budget 1" paint brush

Product Weight 0.04kg

Budget 3" paint brush

Product Weight 0kg

Budget 4" paint brush

Product Weight 0kg

Plastic tray and 9" roller. For a limited time is supplied with free spare roller sleeve.

(subject to stock availibility)

Product Weight 0kg

A PLAIN WHITE UNBLEACHED COTTON CLOTH, USUALLY USED WITH ASBESTOS ENCAPSULANT SEALERS SUCH AS ET10 OR ET150.

Product Weight 10kg