 Scott Protector Phantom VisionAfter extensive research with users and industry specifiers, Scott Protector are introducing Phantom Vision® specifically to enhance and improve the experience of PAPR users. Built on the principles of the original Phantom, the all new Phantom Vision® has been designed and developed to combine proven modern technology with increased wearer acceptance, representing a major advancement in mask mounted full facemask powered respirators.
What's different about Phantom Vision®?
* In addition to the particle filter, Phantom Vision® will also be approved for use with combined filters.
* It is available in three sizes to suit the widest range of users.
* It is built on the Vision mask, providing high levels of comfort and an unrestricted field of view.
* A new high performance motor combines reliable full-shift operation with a long service life.
* A new lightweight lithium-ion battery pack prevents re-charge memory issues.
* Increased levels of water ingress protection, plus protected power contacts and electronic motor control, all ensure through life maintenance costs are minimised.
The new motor and fan unit is the central power house of Phantom Vision®. A positive snap-lock locating system replaces the o ring seal pressure fit of previous models, providing the reassurance of intuitive assembly after cleaning and maintenance. The fan outlet air guide is integral with the motor body and is engineered to direct the airflow at the visor, preventing misting and providing long term comfort for the wearer. Phantom Vision® will provide greater comfort and ease of operation for users in any application requiring full facemask protection.
Contents of Kit :
Supplied in case with
Mask
Blower
Battery
Charger
Belt
Shower Cover
1 x PF251 P3 Filter
Profile 50 Half Mask
* Also provided is a warranty card. Once registered with Scott Health and Safety, the user will be sent 5 x PF251 Filters. Redemption is via Scott Health and Safety and not Safety Industries.
Important Note :
You MUST have a Vision face fit for the new Phantom Vision. The old Phantom face fit is not sufficent, as this is a different face piece.
Click Here to goto the Fit Testing Section
|
 |
| Download the Phantom Vision Brochure by clicking the icon |  |
|
|
Advisory from Scott Protector about Phantom VisionTo download the statement from Scott Protector about Face Fit Testing Certficates and using with Phantom Vision click the icon on the right.
|
|
Advisory from Scott Safety about Phantom VisionTo download the statement from Scott Safety about issues with the Phantom Vision click the icon on the right. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 Scott Protector PhantomWith the blower mounted in the facemask, Phantom reduces the amount of equipment worn and simplifies decontamination. Mask mounted system - no trailing air hose. Compact and lightweight - just 1.5kg including battery. 160 l/min minimum airflow, maintained electronically. Typical 8 hours use from a single charge. Comfortable silicone facemask. No internal half mask required. Shower proof and easy to decontaminate. Simple to clean and maintain.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Scott Protector Phantom - FiltersThe PF251/2 filter is the only approved filter available. There is currently no ABEK filter available for this kit.
|
|
|
|
|
|
 Proflow SC Ready PakThe Proflow SC Asbestos powered air purifying respirator - for use in asbestos removal operations. The CE-certified system incorporates two P3 high-efficiency particle filters and a full-face mask approved to class TM3. The system meets all European and national requirements for respirators to be used by asbestos workers. Proflow SC Asbestos incorporates a downloadable data-logging function that automatically records usage and performance information - making record keeping much easier. The same electronics allow your Scott approved service centre to run diagnostic checks and provide full service history records.
IMPROVED PROTECTION AGAINST WATER INGRESS
o Body and motor clamp redesigned for improved seal efficiency
o Air outlet area sealed with hose attachment adaptor
o Charging socket has extra securing points to the motor case
PROFLOW SC ASBESTOS HIGHLIGHTS
o Electronically maintains a steady160 l/min airflow
o Continuous visible monitor of battery status and filter blockage
o Audible alarm for low battery and filter clogging
o Typical 10 hours use from a single charge
o NiMH high power battery with fast recharge
o Shower-proof construction enhances decontamination
o Extremely low through life running costs
o Range of full face masks including the ultra-comfortable Promask
o No user servicing or calibration required.
TECHNICAL DATA
Air flow : Minimum 160 l/min, automatic adjustment
Battery : NiMH rechargeable, 9V/4.5Ah
Battery operating time : 10 hours from a single charge
Charging device : 6 hours recharging time - Automatic trickle charge
Power pack status indication : Visual display of battery status (A), filter blockage (P)
Weight of unit without filters : 1.6 kg
Sound level : <70 dB
Operation temperature : -10C to +50C
Recharging temperature : Recommended at > 20C
Approvals : EN12942, CE0121
|
|
|
|
|
|
|
|
|
|
 Scott Protector PowerpakThe Powerpak power assisted respirator system is designed for use in arduous environments where toxic dusts, vapours and gases are encountered. Applications include asbestos removal, water treatment, lead paint removal, and chemical industries.The fully self-contained belt unit provides a comfortable flow of filtered air into a choice of silicone or neoprene full facemasks.A range of high efficiency filters is available to cope with most industrial hazards.
Practical
* Replaceable battery that may be charged inside or outside the unit
* Easy to replace filter is well protected from damage
* Simple to service
* Principle components serial marked for record keeping
* No trailing leads for convenience and safety
* Casing is moulded in tough, impact resistant ABS for maximum security and service life
Comfortable
* Protector’s Vision and Gemini full facemasks are accepted as class leading in terms of comfort
* The blower unit is contoured to fit securely on the waist
High protection
* Powerpak exceeds the latest European standard requirements for protection
* A choice of face masks ensures a good fit for the majority of face sizes
* Filter performance is enhanced by the use of military specification media
Easy Decontamination
* Smooth external surface design prevents excessive dust build-up
* A slatted cover protects the filter and fan inlet during showering
* The blower unit can be sealed for complete washing without damaging internal components
Gas vapour filters are available for use with this kit.
Available in 2 options : Vision Facepiece and RFF60 facepiece
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Scott Protector Powerpak - FiltersAvailable in P3 and vapour filters. |
|
|
|
|
|
StorageStorage box and bags are listed below
|
|
|
|
|
|
|
|
|
|
