The SR 100 half mask is made of silicone and is available in two sizes, i.e. S/M and M/L. The mask is equipped with two exhalation valves, which ensures very low exhalation resistance. Valve covers with baffles effectively protect the exhalation membrane against dust and paint mist. The easily adjustable elastic head harness of the mask is designed as a V-shaped loop and has a large, dished crown plate, which contributes towards a comfortable and secure fit.
Tested in accordance with prEN 140:1996

Particle filter SR 510 P3 R is a mechanical filter that provides protection against all types of particles (dust, fume, fog, spray, asbestos), even bacteria, viruses and radioactive pollution.

Combinations of filters can be used if gases/vapours and particles occur at the same time. This filter also fits on all Sundstrom filter respirator products.

Particle filters protects only against particles.

Manufactured to fit the Sundstrom SR100

Sold in boxes of 5

SR 297 ABEK1 protects against the same pollutant types as gas filter SR 315, and also against ammonia.

Tested and approved according to EN 14387:2004.

Manufactured to fit the Sundstrom SR100

Service Life - Should you smell gases or vapours, then the gas filters are exhausted and must be replaced.

Sold Singlely

SR 221 should always be used for particle, gas and combined filters.

The pre-filter protects the main filter against premature clogging by larger particles.


Manufactured to fit the Sundstrom SR100
Free filter ONLY

Sold in boxes of 80

Used for storing Sundstrom half masks and filters.

The box protects the equipment against dirt and physical damage.

Scott Health & Safety's new Profile40 half mask is based on the proven success of the R40 single filter mask.

With the new harness donning is even easier, in fact intuitive, and the front thread fitting accepts filters from the Pro2000 range that weigh 300g or less.

Key Features

Soft silicone facepiece providing flexibility and comfort
New intuitive fit harness with head cradle and through-lock neck buckle
Compatible with Pro2000 filters weighing 300g or less
Twin bellows facepiece design prevents head movement from affecting the integrity of the seal
User friendly clear facepiece
Choice of two sizes
Standards
EN140

Scott Health & Safety's PF10 P3 Particle Filter has exceptionally low breathing resistance to provide comfortable and long duration use.

The standard 40mm thread makes it suitable for use on the Proflow and Autoflow PAPR systems, the entire Full Face Mask range, and the Profile40 Half Mask.

Pro2000 filters are fully EN approved to the latest standards, marked ‘R’ for re-usable (EN 143:2000/ A1:2006), CE certified, and connect via a 40 mm EN148-1 thread. CE approvals: EN143, EN14387. CE0121.

Protects against :

Solid and liquid particles of toxic agents,
radioactive substances and icroorganisms,
e.g. bacteria and viruses.

NB - Please ensure a risk assessment is carried out before choosing your filter type.

Sold in Boxes of 20
Minimum Order Qty : 20

Scott Health & Safety's CF32 Combination Filters have exceptionally low breathing resistance to provide comfortable and long duration use.

The standard 40mm thread makes them suitable for use across the entire Full Face Mask range. Selected types are approved for use on the Proflow and Autoflow PAPR systems, and those weighing 300g or less can be used on the Profile40 Half Mask.

Standards

EN 14387 & EN 143
CF32 A2B2E2K2-P3 PSL R
Product Code : 042799

Protects against :

Organic, inorganic and acid gases and vapours, ammonia and organic ammonia derivatives, solid and liquid hazardous particles, e.g. radioactive and toxic substances and micro-organisms, e.g. bacteria and viruses.

NB - Please ensure a risk assessment is carried out before choosing your filter type.

Sold individually

Moldex 8082 Kit.

Come in a box and is supplied with one set of P3 filters.

Designed to fit the Moldex 8082 Respirator
EN143:2000
EN405:2001

1 pair required for each respirator

Sold in boxes of 8 (4 pairs)

Designed to fit the Moldex 8082 Respirator
EN14387:2004
P3 Filter fits over the ABEK filter using the retaining clip

Service Life - Should you smell gases or vapours, then the gas filters are exhausted and must be replaced.

1 pair required for each respirator

Sold in pairs

To be used when using ABEK filters. P3 filters is secured in the top and then the holder is fastened over the top of the ABEK filter.

Respiratory protection , The Half mask WILLSON PREMIER medium is designed to work when external concentration allows it .

The type of protection depends on the cartridges connected, gases , particules or combined.

The threshold is depending on a theoretical calculation , based on the facial leakage and the efficiency of the adapted canister . The APF is evaluated from 12 to 50 . It allow the use of the Half mask from an external concentration between 12 time to 50 time the Occupational Exposure Limit .

Size : Med

The canister P3 from T series is used for the Particules filter, P3 following the EN 143 ( high efficiency filter 99,95%).

Sold in boxes of 5 pairs

The canister A1B1E1K1 from T series is used against toxics gases
relevant for the A B E K classification on the EN 141 standard, and for the Particules filter, P3 following the EN 143 ( high efficiency filter 99,95%).

Sold in boxes of 3 pairs

TRIGENE ADVANCE Wipes are inpregnated with TRIGENE ADVANCE disinfectant.

TRIGENE ADVANCE Wipes are ideal for the following applications:

- For use in all medical areas, including theatres, clinics, dental surgeries, hospital wards and for the surface disinfection of machines (X-Ray, Mammography, Ultrasound etc.) and breathing apparatus.

- Suitable for the surface disinfection of benches, shelves and laboratory equipment.

- For the disinfection of probes, transducers, centrifuges, pipettes, incubators as well as other sealed devices

- For use in all high risk areas and on most surfaces including glass, metal, ceramics, fabrics, plastic and rubber

TRIGENE ADVANCE Wipes are impregnated with TRIGENE ADVANCE disinfectant and are safe, flexible and economical to use.